1999 GMC Sierra 2500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 GMC Sierra 2500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1999 Sierra 2500 HD Regular Cab — Year-Specific Fitment Context
The 1999 model year marks the beginning of the GMC Sierra 2500 HD Regular Cab's 8x165.1 bolt pattern era, which continued through 2010 (12 consecutive years). Wheels from any 1999–2010 GMC Sierra 2500 HD Regular Cab are cross-compatible with the 1999 model. Across its full production run (1999–2024), the Sierra 2500 HD Regular Cab has also used: 8x180.
GMC Sierra 2500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Regular Cab's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1999 | 8x165.1 | 116.7 | 20-40 |
| 2000 | 8x165.1 | 116.7 | 20-40 |
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1999 GMC Sierra 2500 HD Regular Cab
For your 1999 GMC Sierra 2500 HD Regular Cab, the critical fitment specs are: bolt pattern 8x165.1, center bore 116.7mm, offset 20-40mm, and lug nut size 14x1.5. The center bore is specific; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset within 20-40mm maintains proper suspension geometry and tire clearance; deviations can cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or shank-style. Incorrect lug nuts can lead to wheel loosening. Wheels from 1999-2010 Sierra 2500 HD are direct fit; avoid 8x180 pattern from later years.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Regular Cab appears from 1999 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating, as initial torque can settle.
- ✅ When using aftermarket wheels, verify that the wheel's hub bore is at least 116.7mm; use hub-centric rings to avoid vibrations.
- ✅ Check offset carefully: too low (e.g., 0mm) may cause tire rub on suspension; too high (e.g., 50mm) may contact brake calipers or frame.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 GMC Sierra 2500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1999 GMC Sierra 2500 HD Regular Cab?
The 1999 GMC Sierra 2500 HD Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 2500 HD Regular Cab have the same bolt pattern as the 1999?
The GMC Sierra 2500 HD Regular Cab uses the 8x165.1 pattern from 1999 through 2010. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1999 GMC?
The 1999 Sierra 2500 HD Regular Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 1999 GMC Sierra 2500 HD Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1999 GMC Sierra 2500 HD Regular Cab?
The OEM offset for the 1999 Sierra 2500 HD Regular Cab is typically around 20-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1999 GMC Sierra 2500 HD Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1999 Sierra 2500 HD Regular Cab, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset