2016 GMC Sierra 2500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 GMC Sierra 2500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2016 Sierra 2500 HD Regular Cab — Year-Specific Fitment Context
The 2016 GMC Sierra 2500 HD Regular Cab is in year 6 of 14 using the 8x180 pattern (2011–2024). Wheels from any 2011–2024 GMC Sierra 2500 HD Regular Cab are cross-compatible with the 2016 model. Across its full production run (1999–2024), the Sierra 2500 HD Regular Cab has also used: 8x165.1.
GMC Sierra 2500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Regular Cab's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.7 | 20-40 |
| 2000 | 8x165.1 | 116.7 | 20-40 |
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| ▸ 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2016 GMC Sierra 2500 HD Regular Cab
For your 2016 GMC Sierra 2500 HD Regular Cab, the 8x180 bolt pattern is shared with 2011–2024 models. The critical center bore is 124.9mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 44mm. Deviating more than ±10mm may cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type (cone or ball seat) to avoid wheel loosening. Never use incorrect seat types, as this can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Regular Cab appears from 1999 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore diameter; if aftermarket bore >124.9mm, use hub-centric rings.
- ✅ Check offset carefully: using wheels with offset below 34mm may contact brake calipers.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 GMC Sierra 2500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2016 GMC Sierra 2500 HD Regular Cab?
The 2016 GMC Sierra 2500 HD Regular Cab uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Sierra 2500 HD Regular Cab have the same bolt pattern as the 2016?
The GMC Sierra 2500 HD Regular Cab uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What lug nut size does the 2016 GMC Sierra 2500 HD Regular Cab use?
The 2016 GMC Sierra 2500 HD Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 124.9mm center bore important for the 2016 Sierra 2500 HD Regular Cab?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 44mm offset mean for the 2016 Sierra 2500 HD Regular Cab?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
How tight should I torque the lug nuts on a 2016 GMC Sierra 2500 HD Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset