2007 GMC Sierra 2500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Sierra 2500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 Sierra 2500 HD Regular Cab — Year-Specific Fitment Context
The 2007 GMC Sierra 2500 HD Regular Cab is in year 9 of 12 using the 8x165.1 pattern (1999–2010). Wheels from any 1999–2010 GMC Sierra 2500 HD Regular Cab are cross-compatible with the 2007 model. Across its full production run (1999–2024), the Sierra 2500 HD Regular Cab has also used: 8x180.
GMC Sierra 2500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Regular Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.7 | 20-40 |
| 2000 | 8x165.1 | 116.7 | 20-40 |
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 GMC Sierra 2500 HD Regular Cab
For your 2007 GMC Sierra 2500 HD Regular Cab, the 8x165.1 bolt pattern and 116.7mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 78.1mm or 87.1mm) and require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 20-40mm; lower offsets (closer to 20mm) push wheels outward, risking fender rub, while higher offsets (closer to 40mm) tuck them inward, possibly contacting suspension. Always use the correct 14x1.5 lug nuts with the proper seat (cone or ball) matching your wheels—mixing seats can cause loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Regular Cab appears from 1999 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore ≥116.7mm; use hub-centric rings if larger.
- ✅ Check for caliper clearance with 20mm offset wheels; some aftermarket designs may require spacers.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Sierra 2500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Sierra 2500 HD Regular Cab?
The 2007 GMC Sierra 2500 HD Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 2500 HD Regular Cab have the same bolt pattern as the 2007?
The GMC Sierra 2500 HD Regular Cab uses the 8x165.1 pattern from 1999 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What does 20-40mm offset mean for the 2007 Sierra 2500 HD Regular Cab?
An offset of 20-40mm means the wheel's mounting surface is 20-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
How tight should I torque the lug nuts on a 2007 GMC Sierra 2500 HD Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2007 GMC Sierra 2500 HD Regular Cab?
The factory center bore (hub bore) for the 2007 GMC Sierra 2500 HD Regular Cab is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2007 GMC Sierra 2500 HD Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20-40mm, and a center bore of at least 116.7mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset