2001 GMC Yukon XL 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 GMC Yukon XL 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2001 Yukon XL 2500 — Year-Specific Fitment Context
The 2001 GMC Yukon XL 2500 is in year 2 of 14 using the 6x139.7 pattern (2000–2013). Wheels from any 2000–2013 GMC Yukon XL 2500 are cross-compatible with the 2001 model.
GMC Yukon XL 2500 Bolt Pattern by Year
The table below shows how the Yukon XL 2500's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2001 GMC Yukon XL 2500
For your 2001 GMC Yukon XL 2500, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Stick to a 20-30mm offset range to maintain suspension geometry and avoid rubbing. Always use 14x1.5 lug nuts with the correct seat type (conical or ball seat) matching your wheels; mismatched seats can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 2000-2013 Yukon XL 2500 models are direct fit.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL 2500 appears from 2000 to 2013 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel center bore; if larger than 78.1mm, use hub-centric rings to avoid vibrations.
- ✅ Check that aftermarket wheels have sufficient brake caliper clearance, especially for larger rotors.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 GMC Yukon XL 2500 — Frequently Asked Questions
What is the bolt pattern for a 2001 GMC Yukon XL 2500?
The 2001 GMC Yukon XL 2500 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL 2500 have the same bolt pattern as the 2001?
The GMC Yukon XL 2500 uses the 6x139.7 pattern from 2000 through 2013. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another GMC fit my 2001 Yukon XL 2500?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
How tight should I torque the lug nuts on a 2001 GMC Yukon XL 2500?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2001 GMC Yukon XL 2500?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2001 GMC Yukon XL 2500?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset