2010 GMC Yukon XL 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 GMC Yukon XL 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2010 Yukon XL 2500 — Year-Specific Fitment Context
The 2010 GMC Yukon XL 2500 is in year 11 of 14 using the 6x139.7 pattern (2000–2013). Wheels from any 2000–2013 GMC Yukon XL 2500 are cross-compatible with the 2010 model.
GMC Yukon XL 2500 Bolt Pattern by Year
The table below shows how the Yukon XL 2500's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2010 GMC Yukon XL 2500
For your 2010 GMC Yukon XL 2500, the 6x139.7 bolt pattern is shared with 2000–2013 models, but critical specs differ. The 78.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and hub damage. Offset must stay within 20-30mm; deviations risk rubbing or bearing stress. Always use 14x1.5 lug nuts with correct seat type—factory uses cone seat; aftermarket may require ball seat. Verify lug nut engagement (minimum 6 full turns). Re-torque after 50-100 miles. Avoid wheels with smaller center bore (won't fit) or larger bore without rings. Safety first: improper fitment can lead to wheel loss.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL 2500 appears from 2000 to 2013 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Check for caliper clearance when using wheels with offset near 20mm; some aftermarket designs may contact the brake caliper.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 78.1mm bore; plastic rings are acceptable for street use.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 GMC Yukon XL 2500 — Frequently Asked Questions
What is the bolt pattern for a 2010 GMC Yukon XL 2500?
The 2010 GMC Yukon XL 2500 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL 2500 have the same bolt pattern as the 2010?
The GMC Yukon XL 2500 uses the 6x139.7 pattern from 2000 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 GMC Yukon XL 2500s use lug bolts or lug nuts?
The 2010 Yukon XL 2500 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2010 GMC Yukon XL 2500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Yukon XL 2500, the PCD is 6x139.7.
Will wheels from another GMC fit my 2010 Yukon XL 2500?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
What lug nut size does the 2010 GMC Yukon XL 2500 use?
The 2010 GMC Yukon XL 2500 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset