2011 GMC Yukon XL 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 GMC Yukon XL 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2011 Yukon XL 2500 — Year-Specific Fitment Context
The 2011 GMC Yukon XL 2500 is in year 12 of 14 using the 6x139.7 pattern (2000–2013). Wheels from any 2000–2013 GMC Yukon XL 2500 are cross-compatible with the 2011 model.
GMC Yukon XL 2500 Bolt Pattern by Year
The table below shows how the Yukon XL 2500's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2011 GMC Yukon XL 2500
For your 2011 GMC Yukon XL 2500, the critical fitment specs are a 6x139.7mm bolt pattern, 78.1mm center bore, and offset between 20-30mm. The 78.1mm bore is hub-centric; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. Offset outside the 20-30mm range may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type (conical or ball seat) matching your wheels. Improper lug nut seating can lead to wheel loosening. Verify all specs before purchase to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL 2500 appears from 2000 to 2013 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check brake caliper clearance when using aftermarket wheels, as some designs may interfere with the large brakes on the 2500 model.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 GMC Yukon XL 2500 — Frequently Asked Questions
What is the bolt pattern for a 2011 GMC Yukon XL 2500?
The 2011 GMC Yukon XL 2500 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL 2500 have the same bolt pattern as the 2011?
The GMC Yukon XL 2500 uses the 6x139.7 pattern from 2000 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 GMC Yukon XL 2500?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2011 GMC Yukon XL 2500?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2011 GMC?
The 2011 Yukon XL 2500 uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2011 GMC Yukon XL 2500 use?
The 2011 GMC Yukon XL 2500 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset