2012 GMC Yukon XL 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 GMC Yukon XL 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Yukon XL 2500 — Year-Specific Fitment Context
The 2012 GMC Yukon XL 2500 is in year 13 of 14 using the 6x139.7 pattern (2000–2013). Wheels from any 2000–2013 GMC Yukon XL 2500 are cross-compatible with the 2012 model.
GMC Yukon XL 2500 Bolt Pattern by Year
The table below shows how the Yukon XL 2500's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 GMC Yukon XL 2500
For your 2012 GMC Yukon XL 2500, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 20-30mm to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching your wheels. Improper lug nut seating can cause wheel detachment. Verify wheel load rating exceeds your vehicle's GVWR. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL 2500 appears from 2000 to 2013 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 20mm; they may rub brake calipers or fenders.
- ✅ Check wheel bore diameter; if larger than 78.1mm, use hub-centric rings to center the wheel.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 GMC Yukon XL 2500 — Frequently Asked Questions
What is the bolt pattern for a 2012 GMC Yukon XL 2500?
The 2012 GMC Yukon XL 2500 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL 2500 have the same bolt pattern as the 2012?
The GMC Yukon XL 2500 uses the 6x139.7 pattern from 2000 through 2013. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2012 GMC?
The 2012 Yukon XL 2500 uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2012 GMC Yukon XL 2500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Yukon XL 2500, the PCD is 6x139.7.
What is the center bore of a 2012 GMC Yukon XL 2500?
The factory center bore (hub bore) for the 2012 GMC Yukon XL 2500 is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2012 GMC Yukon XL 2500?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset