2007 GMC Yukon XL 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Yukon XL 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Yukon XL 2500 — Year-Specific Fitment Context
The 2007 GMC Yukon XL 2500 is in year 8 of 14 using the 6x139.7 pattern (2000–2013). Wheels from any 2000–2013 GMC Yukon XL 2500 are cross-compatible with the 2007 model.
GMC Yukon XL 2500 Bolt Pattern by Year
The table below shows how the Yukon XL 2500's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 GMC Yukon XL 2500
For your 2007 GMC Yukon XL 2500, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the studs. Offset must stay within 20-30mm to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel; improper seating can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL 2500 appears from 2000 to 2013 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is 78.1mm or use hub-centric rings; avoid lug-centric mounting.
- ✅ Check offset carefully: too low (negative) may rub frame; too high may contact brakes.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Yukon XL 2500 — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Yukon XL 2500?
The 2007 GMC Yukon XL 2500 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL 2500 have the same bolt pattern as the 2007?
The GMC Yukon XL 2500 uses the 6x139.7 pattern from 2000 through 2013. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2007 GMC Yukon XL 2500?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2007 GMC Yukon XL 2500?
The factory center bore (hub bore) for the 2007 GMC Yukon XL 2500 is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2007 GMC Yukon XL 2500?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
What is the factory wheel offset for a 2007 GMC Yukon XL 2500?
The OEM offset for the 2007 Yukon XL 2500 is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset