2008 Honda Element Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Honda Element, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 51 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Element — Year-Specific Fitment Context
The 2008 Honda Element is in year 6 of 9 using the 5x114.3 pattern (2003–2011). Wheels from any 2003–2011 Honda Element are cross-compatible with the 2008 model.
Honda Element Bolt Pattern by Year
The table below shows how the Element's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Honda Element
For your 2008 Honda Element, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The stock offset is 51mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (60-degree conical). Ball-seat or incorrect pitch nuts can loosen, leading to wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Honda Element appears from 2003 to 2011 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent rubbing on struts or fenders.
- ✅ Use hub-centric rings (64.1mm ID to aftermarket bore) to eliminate vibrations; plastic rings are fine for street use.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Honda Element — Frequently Asked Questions
What is the bolt pattern for a 2008 Honda Element?
The 2008 Honda Element uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 51mm.
What other years of Honda Element have the same bolt pattern as the 2008?
The Honda Element uses the 5x114.3 pattern from 2003 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Honda Element?
The OEM offset for the 2008 Element is typically around 51mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2008 Honda?
The 2008 Element uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2008 Honda Element?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2008 Honda Element?
The factory center bore (hub bore) for the 2008 Honda Element is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset