2010 Honda Element Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Honda Element, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 64.1 mm
Offset (ET) 51
Torque Specs 80 ft-lbs (108 Nm)

2010 Element — Year-Specific Fitment Context

The 2010 Honda Element is in year 8 of 9 using the 5x114.3 pattern (2003–2011). Wheels from any 2003–2011 Honda Element are cross-compatible with the 2010 model.

Honda Element Bolt Pattern by Year

The table below shows how the Element's wheel specifications have changed over the years. The 2010 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2003 5x114.3 64.1 51
2004 5x114.3 64.1 51
2005 5x114.3 64.1 51
2006 5x114.3 64.1 51
2007 5x114.3 64.1 51
2008 5x114.3 64.1 51
2009 5x114.3 64.1 51
▸ 2010 5x114.3 64.1 51
2011 5x114.3 64.1 51

Fitment Notes

The 2010 Honda Element has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Honda Element appears from 2003 to 2011 (9 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2010 Honda Element — Frequently Asked Questions

What is the bolt pattern for a 2010 Honda Element?

The 2010 Honda Element uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 51mm.

What other years of Honda Element have the same bolt pattern as the 2010?

The Honda Element uses the 5x114.3 pattern from 2003 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.

What lug nut size does the 2010 Honda Element use?

The 2010 Honda Element uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the factory wheel offset for a 2010 Honda Element?

The OEM offset for the 2010 Element is typically around 51mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

How do I measure the bolt pattern on my 2010 Honda?

The 2010 Element uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Will wheels from another Honda fit my 2010 Element?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Honda Element is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2010 Honda Element, please report it via our About page contact so we can verify and update this record.

Honda Element By Year

2003 2004 2005 2006 2007 2008 2009 2010 2011

Other Honda Models

Accord Accord Crosstour Accord Hybrid CR-V Hybrid Civic Civic Type R Clarity Electric Clarity Fuel Cell Clarity Plug-in Hybrid Crosstour Fit Insight Odyssey Passport Pilot Prelude Prologue Ridgeline S2000 del Sol