2004 HUMMER H2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 HUMMER H2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 117 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2004 H2 — Year-Specific Fitment Context
The 2004 HUMMER H2 is in year 2 of 7 using the 8x165.1 pattern (2003–2009). Wheels from any 2003–2009 HUMMER H2 are cross-compatible with the 2004 model.
HUMMER H2 Bolt Pattern by Year
The table below shows how the H2's wheel specifications have changed over the years. The 2004 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2004 HUMMER H2
For the 2004 HUMMER H2, the 8x165.1 bolt pattern is shared across 2003–2009 models, ensuring cross-compatibility. The 117mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory spec is 10mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—factory uses cone seats; using ball-seat lug nuts on cone-seat wheels can lead to wheel loss. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, HUMMER H2 appears from 2003 to 2009 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50–100 miles to account for settling.
- ✅ Avoid using aftermarket wheels with a center bore larger than 117mm without hub-centric rings to prevent vibrations.
- ✅ Check offset carefully: a 0mm offset may cause inner tire rub on suspension components, while 20mm offset may protrude beyond fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 HUMMER H2 — Frequently Asked Questions
What is the bolt pattern for a 2004 HUMMER H2?
The 2004 HUMMER H2 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 117mm and the offset is 10mm.
What other years of HUMMER H2 have the same bolt pattern as the 2004?
The HUMMER H2 uses the 8x165.1 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Can I use spacers on my 2004 HUMMER H2?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 117mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Why is matching the 117mm center bore important for the 2004 H2?
The 117mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2004 HUMMER H2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 H2, the PCD is 8x165.1.
What is the center bore of a 2004 HUMMER H2?
The factory center bore (hub bore) for the 2004 HUMMER H2 is 117mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset