2003 HUMMER H2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 HUMMER H2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 117 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2003 H2 — Year-Specific Fitment Context
The 2003 model year marks the beginning of the HUMMER H2's 8x165.1 bolt pattern era, which continued through 2009 (7 consecutive years). Wheels from any 2003–2009 HUMMER H2 are cross-compatible with the 2003 model.
HUMMER H2 Bolt Pattern by Year
The table below shows how the H2's wheel specifications have changed over the years. The 2003 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2003 HUMMER H2
The 2003 HUMMER H2 uses an 8x165.1 bolt pattern with a 117mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibration. The factory offset is 10mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—use conical (60-degree) or ball-seat nuts as specified. Never reuse old lug nuts; torque to 140 ft-lbs in a star pattern. Avoid wheels with a smaller center bore, as they will not fit over the hub.
Historical Fitment Data Reference
In our dataset, HUMMER H2 appears from 2003 to 2009 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for wheel seating.
- ✅ Ensure aftermarket wheels have a center bore of at least 117mm; use hub-centric rings to fill any gap.
- ✅ Check inner clearance for brake calipers and suspension components when offset deviates from 10mm.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 HUMMER H2 — Frequently Asked Questions
What is the bolt pattern for a 2003 HUMMER H2?
The 2003 HUMMER H2 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 117mm and the offset is 10mm.
What other years of HUMMER H2 have the same bolt pattern as the 2003?
The HUMMER H2 uses the 8x165.1 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
Do 2003 HUMMER H2s use lug bolts or lug nuts?
The 2003 H2 requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2003 HUMMER H2 use?
The 2003 HUMMER H2 uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2003 HUMMER H2?
The OEM offset for the 2003 H2 is typically around 10mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another HUMMER fit my 2003 H2?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 117mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset