2007 HUMMER H2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 HUMMER H2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 117 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 H2 — Year-Specific Fitment Context
The 2007 HUMMER H2 is in year 5 of 7 using the 8x165.1 pattern (2003–2009). Wheels from any 2003–2009 HUMMER H2 are cross-compatible with the 2007 model.
HUMMER H2 Bolt Pattern by Year
The table below shows how the H2's wheel specifications have changed over the years. The 2007 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 HUMMER H2
The 2007 HUMMER H2 uses an 8x165.1 bolt pattern with a 117mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 117mm bore, preventing vibrations and load stress. The offset is sensitive; a 10mm range (e.g., 0–20mm) is recommended to avoid rubbing or suspension interference. Always verify lug nut thread pitch (14x1.50) and seat type—factory wheels use a cone seat; aftermarket wheels may require ball-seat nuts. Mismatched seats can cause wheel loosening. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, HUMMER H2 appears from 2003 to 2009 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50–100 miles of driving.
- ✅ Use hub-centric rings with 117mm ID to 8x165.1 aftermarket wheels.
- ✅ Avoid wheels with offset below 0mm or above 20mm to prevent rubbing on suspension or body.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 HUMMER H2 — Frequently Asked Questions
What is the bolt pattern for a 2007 HUMMER H2?
The 2007 HUMMER H2 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 117mm and the offset is 10mm.
What other years of HUMMER H2 have the same bolt pattern as the 2007?
The HUMMER H2 uses the 8x165.1 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2007 HUMMER H2?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 117mm center bore important for the 2007 H2?
The 117mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2007 HUMMER H2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 H2, the PCD is 8x165.1.
What does 10mm offset mean for the 2007 H2?
An offset of 10mm means the wheel's mounting surface is 10mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your HUMMER.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset