2008 Hyundai Accent Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Hyundai Accent, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Accent — Year-Specific Fitment Context
The 2008 Hyundai Accent is in year 8 of 12 using the 4x100 pattern (2001–2012). Wheels from any 2001–2012 Hyundai Accent are cross-compatible with the 2008 model. Across its full production run (1995–2022), the Accent has also used: 4x114.3, 5x114.3.
Hyundai Accent Bolt Pattern by Year
The table below shows how the Accent's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x100 | 54.1 | 46 |
| 2002 | 4x100 | 54.1 | 46 |
| 2003 | 4x100 | 54.1 | 46 |
| 2004 | 4x100 | 54.1 | 46 |
| 2005 | 4x100 | 54.1 | 46 |
| 2006 | 4x100 | 54.1 | 46 |
| 2007 | 4x100 | 54.1 | 46 |
| ▸ 2008 | 4x100 | 54.1 | 46 |
| 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2008 Hyundai Accent
When selecting aftermarket wheels for your 2008 Hyundai Accent, the 4x100 bolt pattern is shared with 2001–2012 models. Critical to safe fitment is the 54.1mm center bore; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is carried by the hub, not the lug nuts. Offset is sensitive: the factory 46mm offset should be maintained within ±5mm to avoid rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify clearance with suspension and brake components before final installation.
Historical Fitment Data Reference
In our dataset, Hyundai Accent appears from 1995 to 2022 (28 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 40mm on the front, as they may rub the strut or fender liner.
- ✅ If using aftermarket wheels, always install hub-centric rings (54.1mm ID to wheel's bore) to prevent vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Hyundai Accent — Frequently Asked Questions
What is the bolt pattern for a 2008 Hyundai Accent?
The 2008 Hyundai Accent uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Hyundai Accent have the same bolt pattern as the 2008?
The Hyundai Accent uses the 4x100 pattern from 2001 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 Hyundai Accent?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Accent, the PCD is 4x100.
Do 2008 Hyundai Accents use lug bolts or lug nuts?
The 2008 Accent requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2008 Hyundai Accent?
The OEM offset for the 2008 Accent is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 46mm offset mean for the 2008 Accent?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset