2011 Hyundai Accent Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Hyundai Accent, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Accent — Year-Specific Fitment Context
The 2011 Hyundai Accent is in year 11 of 12 using the 4x100 pattern (2001–2012). Wheels from any 2001–2012 Hyundai Accent are cross-compatible with the 2011 model. Across its full production run (1995–2022), the Accent has also used: 4x114.3, 5x114.3.
Hyundai Accent Bolt Pattern by Year
The table below shows how the Accent's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x100 | 54.1 | 46 |
| 2002 | 4x100 | 54.1 | 46 |
| 2003 | 4x100 | 54.1 | 46 |
| 2004 | 4x100 | 54.1 | 46 |
| 2005 | 4x100 | 54.1 | 46 |
| 2006 | 4x100 | 54.1 | 46 |
| 2007 | 4x100 | 54.1 | 46 |
| 2008 | 4x100 | 54.1 | 46 |
| 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| ▸ 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2011 Hyundai Accent
For your 2011 Hyundai Accent, the 4x100 bolt pattern and 54.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; a ±5mm deviation is acceptable, but extreme offsets may cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—tapered cone seats are standard. Avoid ball-seat or shank-style nuts. Re-torque after 50-100 miles to maintain clamping force. Wheels from 2001-2012 Accents are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Accent appears from 1995 to 2022 (28 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings when installing aftermarket wheels with a larger center bore to prevent vibration.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using lug nuts with incorrect seat type (e.g., ball seat) as they can loosen and cause wheel separation.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Hyundai Accent — Frequently Asked Questions
What is the bolt pattern for a 2011 Hyundai Accent?
The 2011 Hyundai Accent uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Hyundai Accent have the same bolt pattern as the 2011?
The Hyundai Accent uses the 4x100 pattern from 2001 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Hyundai Accent?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Accent, the PCD is 4x100.
Can I put aftermarket wheels on my 2011 Hyundai Accent?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the center bore of a 2011 Hyundai Accent?
The factory center bore (hub bore) for the 2011 Hyundai Accent is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 46mm offset mean for the 2011 Accent?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset