2011 Hyundai Azera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Hyundai Azera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Azera — Year-Specific Fitment Context
The 2011 Hyundai Azera is in year 6 of 12 using the 5x114.3 pattern (2006–2017). Wheels from any 2006–2017 Hyundai Azera are cross-compatible with the 2011 model.
Hyundai Azera Bolt Pattern by Year
The table below shows how the Azera's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Hyundai Azera
When selecting aftermarket wheels for your 2011 Hyundai Azera, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 35-50mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat—to match the wheel. Using incorrect lug nuts can cause wheel separation. Verify that the wheel's load rating meets or exceeds the Azera's requirements.
Historical Fitment Data Reference
In our dataset, Hyundai Azera appears from 2006 to 2017 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause steering wheel vibration at highway speeds.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some designs may contact the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Hyundai Azera — Frequently Asked Questions
What is the bolt pattern for a 2011 Hyundai Azera?
The 2011 Hyundai Azera uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Azera have the same bolt pattern as the 2011?
The Hyundai Azera uses the 5x114.3 pattern from 2006 through 2017. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Hyundai Azera?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Azera, the PCD is 5x114.3.
Will wheels from another Hyundai fit my 2011 Azera?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 35-50mm offset mean for the 2011 Azera?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Why is matching the 67.1mm center bore important for the 2011 Azera?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset