2008 Hyundai Azera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Hyundai Azera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Azera — Year-Specific Fitment Context
The 2008 Hyundai Azera is in year 3 of 12 using the 5x114.3 pattern (2006–2017). Wheels from any 2006–2017 Hyundai Azera are cross-compatible with the 2008 model.
Hyundai Azera Bolt Pattern by Year
The table below shows how the Azera's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Hyundai Azera
For your 2008 Hyundai Azera, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (conical or ball seat) to avoid wheel loosening. Verify lug nut engagement—at least 6-8 full turns. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly installed.
Historical Fitment Data Reference
In our dataset, Hyundai Azera appears from 2006 to 2017 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Check for caliper clearance when using wheels with offset near 35mm; some aftermarket designs may interfere.
- ✅ If using aftermarket wheels, always install hub-centric rings (67.1mm ID to 73.1mm OD) to prevent vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Hyundai Azera — Frequently Asked Questions
What is the bolt pattern for a 2008 Hyundai Azera?
The 2008 Hyundai Azera uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Azera have the same bolt pattern as the 2008?
The Hyundai Azera uses the 5x114.3 pattern from 2006 through 2017. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 35-50mm offset mean for the 2008 Azera?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Why is matching the 67.1mm center bore important for the 2008 Azera?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2008 Hyundai Azera?
The factory center bore (hub bore) for the 2008 Hyundai Azera is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 Hyundai?
The 2008 Azera uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset