2016 Hyundai Azera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Hyundai Azera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Azera — Year-Specific Fitment Context
The 2016 Hyundai Azera is in year 11 of 12 using the 5x114.3 pattern (2006–2017). Wheels from any 2006–2017 Hyundai Azera are cross-compatible with the 2016 model.
Hyundai Azera Bolt Pattern by Year
The table below shows how the Azera's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Hyundai Azera
For your 2016 Hyundai Azera, the 5x114.3 bolt pattern is shared with 2006–2017 models, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35–50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (conical or ball seat) to avoid wheel loosening. Verify lug nut engagement—at least 6–8 full turns—and re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Azera appears from 2006 to 2017 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check that aftermarket wheels clear the brake calipers, especially if upgrading to larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Hyundai Azera — Frequently Asked Questions
What is the bolt pattern for a 2016 Hyundai Azera?
The 2016 Hyundai Azera uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Azera have the same bolt pattern as the 2016?
The Hyundai Azera uses the 5x114.3 pattern from 2006 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the factory wheel offset for a 2016 Hyundai Azera?
The OEM offset for the 2016 Azera is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-50mm offset mean for the 2016 Azera?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Can I use spacers on my 2016 Hyundai Azera?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How do I measure the bolt pattern on my 2016 Hyundai?
The 2016 Azera uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset