2026 Hyundai Elantra Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai Elantra Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Hyundai Elantra Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Elantra Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Hyundai Elantra Hybrid's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2026 Hyundai Elantra Hybrid are cross-compatible with the 2026 model.
Hyundai Elantra Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Elantra Hybrid (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the Elantra Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Hyundai Elantra Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai Elantra Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Genesis G70 | 67.1 mm (Exact) | 34-44 | 12x1.5 (Ball) |
| 2025 Genesis G80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Ball) |
| 2025 Genesis G90 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Ball) |
| 2025 Genesis Genesis | 67.1 mm (Exact) | 35-45 | 12x1.5 (Ball) |
| 2025 Genesis GV60 | 67.1 mm (Exact) | 45 | 12x1.5 (Flat) |
| 2025 Genesis GV70 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai Elantra Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai Elantra Hybrid?
The 2026 Hyundai Elantra Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Elantra Hybrid have the same bolt pattern as the 2026?
The Hyundai Elantra Hybrid uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Hyundai Elantra Hybrid?
The factory center bore (hub bore) for the 2026 Hyundai Elantra Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 67.1mm center bore important for the 2026 Elantra Hybrid?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2026 Hyundai Elantra Hybrid use?
The 2026 Hyundai Elantra Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2026 Hyundai Elantra Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Elantra Hybrid, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →