2017 Hyundai Ioniq Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Hyundai Ioniq Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Ioniq Hybrid — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Hyundai Ioniq Hybrid's 5x114.3 bolt pattern era, which continued through 2023 (7 consecutive years). Wheels from any 2017–2023 Hyundai Ioniq Hybrid are cross-compatible with the 2017 model.
Hyundai Ioniq Hybrid Bolt Pattern by Year
The table below shows how the Ioniq Hybrid's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Hyundai Ioniq Hybrid
For the 2017 Hyundai Ioniq Hybrid, the 5x114.3 bolt pattern is paired with a 67.1mm center bore. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Mixing seat types can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safe suspension geometry.
Historical Fitment Data Reference
In our dataset, Hyundai Ioniq Hybrid appears from 2017 to 2023 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using aftermarket wheels with a center bore larger than 67.1mm without hub-centric rings.
- ✅ Ensure aftermarket wheels have a conical (60-degree) seat to match factory lug nuts; ball-seat or flat-seat nuts are incompatible.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Hyundai Ioniq Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2017 Hyundai Ioniq Hybrid?
The 2017 Hyundai Ioniq Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Hyundai Ioniq Hybrid have the same bolt pattern as the 2017?
The Hyundai Ioniq Hybrid uses the 5x114.3 pattern from 2017 through 2023. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2017 Hyundai?
The 2017 Ioniq Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2017 Hyundai Ioniq Hybrid?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 2017 Ioniq Hybrid?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2017 Hyundai Ioniq Hybrid?
The OEM offset for the 2017 Ioniq Hybrid is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset