2018 Hyundai Ioniq Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Hyundai Ioniq Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Ioniq Hybrid — Year-Specific Fitment Context
The 2018 Hyundai Ioniq Hybrid is in year 2 of 7 using the 5x114.3 pattern (2017–2023). Wheels from any 2017–2023 Hyundai Ioniq Hybrid are cross-compatible with the 2018 model.
Hyundai Ioniq Hybrid Bolt Pattern by Year
The table below shows how the Ioniq Hybrid's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Hyundai Ioniq Hybrid
For your 2018 Hyundai Ioniq Hybrid, the critical fitment specs are: bolt pattern 5x114.3, center bore 67.1mm, offset 45mm, and lug nuts 12x1.50 with conical (60-degree) seats. The 67.1mm center bore is hub-centric; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: staying within ±5mm of 45mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nut thread pitch (12x1.50) and seat type—conical for most aftermarket wheels, ball seat for some OEM. Improper lug nuts can cause wheel loosening. Wheels from 2017–2023 Ioniq Hybrids are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Ioniq Hybrid appears from 2017 to 2023 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration at highway speeds.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm, as the Ioniq's front calipers are large.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Hyundai Ioniq Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2018 Hyundai Ioniq Hybrid?
The 2018 Hyundai Ioniq Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Hyundai Ioniq Hybrid have the same bolt pattern as the 2018?
The Hyundai Ioniq Hybrid uses the 5x114.3 pattern from 2017 through 2023. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the center bore of a 2018 Hyundai Ioniq Hybrid?
The factory center bore (hub bore) for the 2018 Hyundai Ioniq Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2018 Hyundai Ioniq Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2018 Hyundai Ioniq Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Ioniq Hybrid, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2018 Hyundai Ioniq Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset