2019 Hyundai Ioniq Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Ioniq Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Ioniq Hybrid — Year-Specific Fitment Context
The 2019 Hyundai Ioniq Hybrid is in year 3 of 7 using the 5x114.3 pattern (2017–2023). Wheels from any 2017–2023 Hyundai Ioniq Hybrid are cross-compatible with the 2019 model.
Hyundai Ioniq Hybrid Bolt Pattern by Year
The table below shows how the Ioniq Hybrid's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Ioniq Hybrid
For your 2019 Hyundai Ioniq Hybrid, the critical fitment specs are bolt pattern 5x114.3, center bore 67.1mm, offset 35-50mm, and lug nut size 12x1.5. The 67.1mm center bore is hub-centric; aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load transfer. Offset outside the 35-50mm range can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct 12x1.5 thread pitch and seat type (conical 60-degree for most aftermarket wheels; ball seat for OEM). Improper lug nuts can lead to wheel loosening. Wheels from 2017-2023 Ioniq Hybrid are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Ioniq Hybrid appears from 2017 to 2023 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 35mm; they may rub on the strut or fender.
- ✅ Use hub-centric rings if aftermarket wheel center bore exceeds 67.1mm to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Ioniq Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Ioniq Hybrid?
The 2019 Hyundai Ioniq Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Ioniq Hybrid have the same bolt pattern as the 2019?
The Hyundai Ioniq Hybrid uses the 5x114.3 pattern from 2017 through 2023. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 Hyundai Ioniq Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2019 Hyundai?
The 2019 Ioniq Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Hyundai fit my 2019 Ioniq Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 35-50mm offset mean for the 2019 Ioniq Hybrid?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset