2019 Hyundai Ioniq Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Ioniq Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Ioniq Plug-in Hybrid — Year-Specific Fitment Context
The 2019 Hyundai Ioniq Plug-in Hybrid is in year 2 of 5 using the 5x114.3 pattern (2018–2022). Wheels from any 2018–2022 Hyundai Ioniq Plug-in Hybrid are cross-compatible with the 2019 model.
Hyundai Ioniq Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Ioniq Plug-in Hybrid's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Ioniq Plug-in Hybrid
When selecting aftermarket wheels for your 2019 Hyundai Ioniq Plug-in Hybrid, the center bore of 67.1mm is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 35-50mm; deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always verify lug nut compatibility: the thread pitch is 12x1.5, and the seat type must match—typically a conical (60-degree) seat for aftermarket wheels. Using incorrect lug nuts can lead to wheel detachment. For a direct fit, wheels from 2018–2022 Ioniq Plug-in Hybrid models are cross-compatible.
Historical Fitment Data Reference
In our dataset, Hyundai Ioniq Plug-in Hybrid appears from 2018 to 2022 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration at highway speeds.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Ioniq Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Ioniq Plug-in Hybrid?
The 2019 Hyundai Ioniq Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Ioniq Plug-in Hybrid have the same bolt pattern as the 2019?
The Hyundai Ioniq Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2022. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Hyundai Ioniq Plug-in Hybrids use lug bolts or lug nuts?
The 2019 Ioniq Plug-in Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2019 Hyundai Ioniq Plug-in Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2019 Hyundai Ioniq Plug-in Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2019 Hyundai Ioniq Plug-in Hybrid?
The factory center bore (hub bore) for the 2019 Hyundai Ioniq Plug-in Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset