2020 Hyundai Ioniq Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Hyundai Ioniq Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Ioniq Plug-in Hybrid — Year-Specific Fitment Context
The 2020 Hyundai Ioniq Plug-in Hybrid is in year 3 of 5 using the 5x114.3 pattern (2018–2022). Wheels from any 2018–2022 Hyundai Ioniq Plug-in Hybrid are cross-compatible with the 2020 model.
Hyundai Ioniq Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Ioniq Plug-in Hybrid's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Hyundai Ioniq Plug-in Hybrid
For your 2020 Hyundai Ioniq Plug-in Hybrid, the center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibrations and ensure load is on the hub, not the lugs. Offset must stay within 35-50mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Using incorrect lug nuts can cause wheel separation. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Hyundai Ioniq Plug-in Hybrid appears from 2018 to 2022 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid wheels with offset below 35mm—they may contact the strut or fender on full lock.
- ✅ If using aftermarket wheels, ensure hub-centric rings are aluminum or plastic and match the 67.1mm bore exactly.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Hyundai Ioniq Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2020 Hyundai Ioniq Plug-in Hybrid?
The 2020 Hyundai Ioniq Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Ioniq Plug-in Hybrid have the same bolt pattern as the 2020?
The Hyundai Ioniq Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2022. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2020 Hyundai Ioniq Plug-in Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 Hyundai?
The 2020 Ioniq Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2020 Hyundai Ioniq Plug-in Hybrid?
The factory center bore (hub bore) for the 2020 Hyundai Ioniq Plug-in Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Hyundai fit my 2020 Ioniq Plug-in Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset