2020 Hyundai Kona Electric Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Hyundai Kona Electric, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Kona Electric — Year-Specific Fitment Context
The 2020 Hyundai Kona Electric is in year 2 of 6 using the 5x114.3 pattern (2019–2024). Wheels from any 2019–2024 Hyundai Kona Electric are cross-compatible with the 2020 model.
Hyundai Kona Electric Bolt Pattern by Year
The table below shows how the Kona Electric's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Hyundai Kona Electric
When selecting aftermarket wheels for your 2020 Hyundai Kona Electric, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 49mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use the correct lug nuts: M12x1.50 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can cause wheel loosening. Verify that aftermarket wheels are load-rated for the Kona Electric's weight (curb ~3,700 lbs). Improper fitment compromises safety and may void warranty.
Historical Fitment Data Reference
In our dataset, Hyundai Kona Electric appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and thermal expansion.
- ✅ Avoid using universal fitment wheels without hub rings; the 67.1mm bore is vehicle-specific and essential for centering.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels that have a different spoke design or offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Hyundai Kona Electric — Frequently Asked Questions
What is the bolt pattern for a 2020 Hyundai Kona Electric?
The 2020 Hyundai Kona Electric uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 49mm.
What other years of Hyundai Kona Electric have the same bolt pattern as the 2020?
The Hyundai Kona Electric uses the 5x114.3 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Hyundai?
The 2020 Kona Electric uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2020 Hyundai Kona Electric?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 49mm, and a center bore of at least 67.1mm (using hub rings if larger).
Can I use spacers on my 2020 Hyundai Kona Electric?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your M 12x1.50 hardware.
What does 49mm offset mean for the 2020 Kona Electric?
An offset of 49mm means the wheel's mounting surface is 49mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset