2019 Hyundai Kona Electric Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Kona Electric, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Kona Electric — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Hyundai Kona Electric's 5x114.3 bolt pattern era, which continued through 2024 (6 consecutive years). Wheels from any 2019–2024 Hyundai Kona Electric are cross-compatible with the 2019 model.
Hyundai Kona Electric Bolt Pattern by Year
The table below shows how the Kona Electric's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Kona Electric
The 2019 Hyundai Kona Electric uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to match the bore, preventing vibration and ensuring proper load distribution. The factory offset is 49mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (M12x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility before installation.
Historical Fitment Data Reference
In our dataset, Hyundai Kona Electric appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check inner clearance for offset changes; a lower offset (e.g., 40mm) may require fender rolling or spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Kona Electric — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Kona Electric?
The 2019 Hyundai Kona Electric uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 49mm.
What other years of Hyundai Kona Electric have the same bolt pattern as the 2019?
The Hyundai Kona Electric uses the 5x114.3 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Hyundai?
The 2019 Kona Electric uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2019 Hyundai Kona Electric?
The OEM offset for the 2019 Kona Electric is typically around 49mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2019 Hyundai Kona Electric?
Refer to your owner's manual for exact specs, but always tighten the M 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 2019 Kona Electric?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset