2022 Hyundai Kona Electric Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Hyundai Kona Electric, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Kona Electric — Year-Specific Fitment Context
The 2022 Hyundai Kona Electric is in year 4 of 6 using the 5x114.3 pattern (2019–2024). Wheels from any 2019–2024 Hyundai Kona Electric are cross-compatible with the 2022 model.
Hyundai Kona Electric Bolt Pattern by Year
The table below shows how the Kona Electric's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Hyundai Kona Electric
For your 2022 Hyundai Kona Electric, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibrations and ensure proper load distribution. Offset must stay within 35-50mm; deviating can cause rubbing or suspension damage. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical 60-degree for most aftermarket wheels; ball seat for OEM). Never mix seat types. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Hyundai Kona Electric appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify that the wheel's center bore is at least 67.1mm and use hub-centric rings.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not push offset beyond 50mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Hyundai Kona Electric — Frequently Asked Questions
What is the bolt pattern for a 2022 Hyundai Kona Electric?
The 2022 Hyundai Kona Electric uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Kona Electric have the same bolt pattern as the 2022?
The Hyundai Kona Electric uses the 5x114.3 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Do 2022 Hyundai Kona Electrics use lug bolts or lug nuts?
The 2022 Kona Electric requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2022 Hyundai Kona Electric?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Kona Electric, the PCD is 5x114.3.
What is the factory wheel offset for a 2022 Hyundai Kona Electric?
The OEM offset for the 2022 Kona Electric is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2022 Hyundai Kona Electric?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset