2023 Hyundai Kona Electric Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 Hyundai Kona Electric, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2023 Kona Electric — Year-Specific Fitment Context
The 2023 Hyundai Kona Electric is in year 5 of 6 using the 5x114.3 pattern (2019–2024). Wheels from any 2019–2024 Hyundai Kona Electric are cross-compatible with the 2023 model.
Hyundai Kona Electric Bolt Pattern by Year
The table below shows how the Kona Electric's wheel specifications have changed over the years. The 2023 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2023 Hyundai Kona Electric
For the 2023 Hyundai Kona Electric, the 5x114.3 bolt pattern is paired with a 67.1mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing on suspension or fenders. Use only 12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Never mix seat types. Always torque to manufacturer specs (79-94 lb-ft) and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Kona Electric appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and thermal expansion.
- ✅ Verify aftermarket wheels have a center bore of at least 67.1mm; use hub-centric rings if larger to avoid vibrations.
- ✅ Check offset carefully: lower than 35mm may rub inner fender; higher than 50mm may contact brake calipers or suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2023 Hyundai Kona Electric — Frequently Asked Questions
What is the bolt pattern for a 2023 Hyundai Kona Electric?
The 2023 Hyundai Kona Electric uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Kona Electric have the same bolt pattern as the 2023?
The Hyundai Kona Electric uses the 5x114.3 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.
What is the factory wheel offset for a 2023 Hyundai Kona Electric?
The OEM offset for the 2023 Kona Electric is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2023 Hyundai Kona Electric use?
The 2023 Hyundai Kona Electric uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 35-50mm offset mean for the 2023 Kona Electric?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the PCD for a 2023 Hyundai Kona Electric?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2023 Kona Electric, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset