2026 Hyundai Santa Cruz Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai Santa Cruz is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Hyundai Santa Cruz Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Santa Cruz — Year-Specific Fitment Context
The 2026 model year is the final year of the Hyundai Santa Cruz's 5x114.3 bolt pattern run (since 2022). Wheels from any 2022–2026 Hyundai Santa Cruz are cross-compatible with the 2026 model.
Hyundai Santa Cruz Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Santa Cruz (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Santa Cruz's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Hyundai Santa Cruz Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai Santa Cruz, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lotus Emira | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Ghibli | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati Grancabrio | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Maserati GranTurismo | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Levante | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati MC20 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai Santa Cruz — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai Santa Cruz?
The 2026 Hyundai Santa Cruz uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Hyundai Santa Cruz have the same bolt pattern as the 2026?
The Hyundai Santa Cruz uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Hyundai Santa Cruz?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2026 Hyundai Santa Cruz?
The OEM offset for the 2026 Santa Cruz is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-45mm offset mean for the 2026 Santa Cruz?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What lug nut size does the 2026 Hyundai Santa Cruz use?
The 2026 Hyundai Santa Cruz uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →