2022 Hyundai Santa Fe Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Hyundai Santa Fe Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Santa Fe Plug-in Hybrid — Year-Specific Fitment Context
The 2022 model year marks the beginning of the Hyundai Santa Fe Plug-in Hybrid's 5x114.3 bolt pattern era, which continued through 2023 (2 consecutive years). Wheels from any 2022–2023 Hyundai Santa Fe Plug-in Hybrid are cross-compatible with the 2022 model.
Hyundai Santa Fe Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Santa Fe Plug-in Hybrid's wheel specifications have changed over the years. The 2022 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Hyundai Santa Fe Plug-in Hybrid
For the 2022 Hyundai Santa Fe Plug-in Hybrid, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or suspension damage. Use only 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats. Never mix seat types; improper seating can cause wheel loss. Always verify lug nut length to avoid bottoming out or insufficient thread engagement.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe Plug-in Hybrid appears from 2022 to 2023 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from pre-2022 Santa Fe models; they have a different bolt pattern (5x139.7).
- ✅ When installing aftermarket wheels, confirm that the wheel's hub bore is at least 67.1mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Hyundai Santa Fe Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2022 Hyundai Santa Fe Plug-in Hybrid?
The 2022 Hyundai Santa Fe Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Santa Fe Plug-in Hybrid have the same bolt pattern as the 2022?
The Hyundai Santa Fe Plug-in Hybrid uses the 5x114.3 pattern from 2022 through 2023. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2022 Hyundai Santa Fe Plug-in Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2022 Hyundai Santa Fe Plug-in Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Santa Fe Plug-in Hybrid, the PCD is 5x114.3.
Will wheels from another Hyundai fit my 2022 Santa Fe Plug-in Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How do I measure the bolt pattern on my 2022 Hyundai?
The 2022 Santa Fe Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset