1995 Hyundai Scoupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Hyundai Scoupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1995 Scoupe — Year-Specific Fitment Context
The 1995 model year is the final year of the Hyundai Scoupe's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1995 Hyundai Scoupe are cross-compatible with the 1995 model.
Hyundai Scoupe Bolt Pattern by Year
The table below shows how the Scoupe's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1995 Hyundai Scoupe
For your 1995 Hyundai Scoupe, the 5x114.3 bolt pattern is shared with many vehicles, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or tapered seats. Mismatched lug nuts can cause wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Scoupe appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is unique and rings are essential for safety.
- ✅ Check for caliper clearance when using wheels with offset near 35mm; some aftermarket designs may contact the brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Hyundai Scoupe — Frequently Asked Questions
What is the bolt pattern for a 1995 Hyundai Scoupe?
The 1995 Hyundai Scoupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Scoupe have the same bolt pattern as the 1995?
The Hyundai Scoupe uses the 5x114.3 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Can I use spacers on my 1995 Hyundai Scoupe?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How do I measure the bolt pattern on my 1995 Hyundai?
The 1995 Scoupe uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1995 Hyundai Scoupe?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1995 Hyundai Scoupe?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset