1992 Hyundai Scoupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Hyundai Scoupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Scoupe — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Hyundai Scoupe's 5x114.3 bolt pattern era, which continued through 1995 (4 consecutive years). Wheels from any 1992–1995 Hyundai Scoupe are cross-compatible with the 1992 model.
Hyundai Scoupe Bolt Pattern by Year
The table below shows how the Scoupe's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Hyundai Scoupe
For your 1992 Hyundai Scoupe, the 5x114.3 bolt pattern is shared with 1992-1995 models. The center bore is 67.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing or bearing damage. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (cone or ball) matching the wheel. Mismatched seats can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Scoupe appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Check offset clearance with suspension and fenders; 35-50mm is safe.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Hyundai Scoupe — Frequently Asked Questions
What is the bolt pattern for a 1992 Hyundai Scoupe?
The 1992 Hyundai Scoupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Scoupe have the same bolt pattern as the 1992?
The Hyundai Scoupe uses the 5x114.3 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the center bore of a 1992 Hyundai Scoupe?
The factory center bore (hub bore) for the 1992 Hyundai Scoupe is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 67.1mm center bore important for the 1992 Scoupe?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Hyundai fit my 1992 Scoupe?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 1992 Hyundai Scoupe?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset