2019 Hyundai Veloster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Veloster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Veloster — Year-Specific Fitment Context
The 2019 Hyundai Veloster is in year 8 of 11 using the 5x114.3 pattern (2012–2022). Wheels from any 2012–2022 Hyundai Veloster are cross-compatible with the 2019 model.
Hyundai Veloster Bolt Pattern by Year
The table below shows how the Veloster's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Veloster
For your 2019 Hyundai Veloster, the critical center bore is 67.1mm. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is tight: 35-50mm. Sticking to 45-50mm maintains factory geometry; lower offsets may cause rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or conical. Mismatched seats can lead to wheel loosening. Verify compatibility with 2012-2022 Veloster models for direct swaps.
Historical Fitment Data Reference
In our dataset, Hyundai Veloster appears from 2012 to 2022 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 80-90 ft-lbs (check manual) to account for settling.
- ✅ Avoid spacers without extended studs; they can reduce thread engagement and cause failure.
- ✅ When using aftermarket wheels, ensure the hub bore is at least 67.1mm and use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Veloster — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Veloster?
The 2019 Hyundai Veloster uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Veloster have the same bolt pattern as the 2019?
The Hyundai Veloster uses the 5x114.3 pattern from 2012 through 2022. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Hyundai Veloster?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-50mm offset mean for the 2019 Veloster?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
How do I measure the bolt pattern on my 2019 Hyundai?
The 2019 Veloster uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2019 Hyundai Veloster?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset