2013 Hyundai Veloster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Hyundai Veloster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Veloster — Year-Specific Fitment Context
The 2013 Hyundai Veloster is in year 2 of 11 using the 5x114.3 pattern (2012–2022). Wheels from any 2012–2022 Hyundai Veloster are cross-compatible with the 2013 model.
Hyundai Veloster Bolt Pattern by Year
The table below shows how the Veloster's wheel specifications have changed over the years. The 2013 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Hyundai Veloster
For your 2013 Hyundai Veloster, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Ball-seat lug nuts are not compatible and can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Hyundai Veloster appears from 2012 to 2022 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings.
- ✅ Check that aftermarket wheels have sufficient clearance for the front brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Hyundai Veloster — Frequently Asked Questions
What is the bolt pattern for a 2013 Hyundai Veloster?
The 2013 Hyundai Veloster uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Veloster have the same bolt pattern as the 2013?
The Hyundai Veloster uses the 5x114.3 pattern from 2012 through 2022. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the factory wheel offset for a 2013 Hyundai Veloster?
The OEM offset for the 2013 Veloster is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2013 Hyundai Veloster?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Hyundai fit my 2013 Veloster?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2013 Hyundai Veloster?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset