2014 Hyundai Veloster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Hyundai Veloster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Veloster — Year-Specific Fitment Context
The 2014 Hyundai Veloster is in year 3 of 11 using the 5x114.3 pattern (2012–2022). Wheels from any 2012–2022 Hyundai Veloster are cross-compatible with the 2014 model.
Hyundai Veloster Bolt Pattern by Year
The table below shows how the Veloster's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Hyundai Veloster
For your 2014 Hyundai Veloster, the 5x114.3 bolt pattern is shared across 2012–2022 models, ensuring cross-compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibrations and ensure load support. Offset is sensitive; the factory 46mm offset maintains proper suspension geometry and clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified. Avoid using incorrect lug nuts, as they can loosen or damage the wheel. Safety first: improper fitment compromises vehicle control.
Historical Fitment Data Reference
In our dataset, Hyundai Veloster appears from 2012 to 2022 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ When installing aftermarket wheels, always use hub-centric rings (67.1mm ID to wheel's bore OD) to prevent vibrations.
- ✅ Check inner clearance for wheels wider than 7.5 inches or offset below 40mm; the strut and fender are tight on this model.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Hyundai Veloster — Frequently Asked Questions
What is the bolt pattern for a 2014 Hyundai Veloster?
The 2014 Hyundai Veloster uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Veloster have the same bolt pattern as the 2014?
The Hyundai Veloster uses the 5x114.3 pattern from 2012 through 2022. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 Hyundai Veloster?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Veloster, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2014 Hyundai Veloster?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Will wheels from another Hyundai fit my 2014 Veloster?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2014 Hyundai Veloster?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset