2008 INFINITI G Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 INFINITI G, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 G — Year-Specific Fitment Context
The 2008 INFINITI G is in year 17 of 22 using the 5x114.3 pattern (1992–2013). Wheels from any 1992–2013 INFINITI G are cross-compatible with the 2008 model.
INFINITI G Bolt Pattern by Year
The table below shows how the G's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| ▸ 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 INFINITI G
For your 2008 INFINITI G, the bolt pattern is 5x114.3 with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore; you must use hub-centric rings to avoid vibrations and ensure proper load distribution. The factory offset is around 40mm; staying within ±5mm is recommended to prevent rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—use conical (60-degree) or ball seat nuts as specified. Incorrect lug nuts can cause wheel loosening. Cross-compatible wheels from 1992–2013 INFINITI G models fit, but always confirm offset and bore.
Historical Fitment Data Reference
In our dataset, INFINITI G appears from 1992 to 2013 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with lower offset (e.g., 35mm) to avoid contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 INFINITI G — Frequently Asked Questions
What is the bolt pattern for a 2008 INFINITI G?
The 2008 INFINITI G uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI G have the same bolt pattern as the 2008?
The INFINITI G uses the 5x114.3 pattern from 1992 through 2013. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 INFINITI G?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the factory wheel offset for a 2008 INFINITI G?
The OEM offset for the 2008 G is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2008 INFINITI G?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 G, the PCD is 5x114.3.
What is the center bore of a 2008 INFINITI G?
The factory center bore (hub bore) for the 2008 INFINITI G is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset