1992 INFINITI G Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 INFINITI G, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 G — Year-Specific Fitment Context
The 1992 model year marks the beginning of the INFINITI G's 5x114.3 bolt pattern era, which continued through 2013 (22 consecutive years). Wheels from any 1992–2013 INFINITI G are cross-compatible with the 1992 model.
INFINITI G Bolt Pattern by Year
The table below shows how the G's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 66.1 | 40-50 |
| 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 INFINITI G
For your 1992 INFINITI G, the 5x114.3 bolt pattern is shared with 1992-2013 models, offering many OEM and aftermarket options. The 66.1mm center bore requires hub-centric rings for non-OEM wheels to prevent vibration. Offset must stay within 40-50mm; lower offsets cause fender rubbing, higher offsets risk brake clearance. Always use 12x1.25 lug nuts with the correct seat (conical 60-degree for most aftermarket, ball seat for OEM). Improper seat can lead to wheel loosening. Verify hub bore and offset before purchase.
Historical Fitment Data Reference
In our dataset, INFINITI G appears from 1992 to 2013 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm; they will rub the fenders on this chassis.
- ✅ If using aftermarket wheels, confirm hub-centric rings are included or purchase separately to match 66.1mm bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 INFINITI G — Frequently Asked Questions
What is the bolt pattern for a 1992 INFINITI G?
The 1992 INFINITI G uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI G have the same bolt pattern as the 1992?
The INFINITI G uses the 5x114.3 pattern from 1992 through 2013. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 1992 G?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 1992 INFINITI G?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the PCD for a 1992 INFINITI G?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 G, the PCD is 5x114.3.
How do I measure the bolt pattern on my 1992 INFINITI?
The 1992 G uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset