1995 INFINITI J Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 INFINITI J, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.25
Center Bore (CB) 66.1 mm
Offset (ET) 40-50
Torque Specs 80 ft-lbs (108 Nm)

1995 J — Year-Specific Fitment Context

The 1995 INFINITI J is in year 3 of 5 using the 5x114.3 pattern (1993–1997). Wheels from any 1993–1997 INFINITI J are cross-compatible with the 1995 model.

INFINITI J Bolt Pattern by Year

The table below shows how the J's wheel specifications have changed over the years. The 1995 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1993 5x114.3 66.1 40-50
1994 5x114.3 66.1 40-50
▸ 1995 5x114.3 66.1 40-50
1996 5x114.3 66.1 40-50
1997 5x114.3 66.1 40-50

Fitment Notes

The 1995 INFINITI J has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, INFINITI J appears from 1993 to 1997 (5 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

1995 INFINITI J — Frequently Asked Questions

What is the bolt pattern for a 1995 INFINITI J?

The 1995 INFINITI J uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.

What other years of INFINITI J have the same bolt pattern as the 1995?

The INFINITI J uses the 5x114.3 pattern from 1993 through 1997. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.

What is the factory wheel offset for a 1995 INFINITI J?

The OEM offset for the 1995 J is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I use spacers on my 1995 INFINITI J?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.

Why is matching the 66.1mm center bore important for the 1995 J?

The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

What does 40-50mm offset mean for the 1995 J?

An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

INFINITI J is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1995 INFINITI J, please report it via our About page contact so we can verify and update this record.

INFINITI J By Year

1993 1994 1995 1996 1997

Other INFINITI Models

EX FX G I J JX M Q Q40 Q50 Q60 Q70 QX QX30 QX50 QX55 QX60 QX70 QX80