2007 INFINITI M Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 INFINITI M, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 M — Year-Specific Fitment Context
The 2007 INFINITI M is in year 16 of 22 using the 5x114.3 pattern (1992–2013). Wheels from any 1992–2013 INFINITI M are cross-compatible with the 2007 model.
INFINITI M Bolt Pattern by Year
The table below shows how the M's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 5x114.3 | 66.1 | 40-50 |
| 2004 | 5x114.3 | 66.1 | 40-50 |
| 2006 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2007 | 5x114.3 | 66.1 | 40-50 |
| 2008 | 5x114.3 | 66.1 | 40-50 |
| 2009 | 5x114.3 | 66.1 | 40-50 |
| 2010 | 5x114.3 | 66.1 | 40-50 |
| 2011 | 5x114.3 | 66.1 | 40-50 |
| 2012 | 5x114.3 | 66.1 | 40-50 |
| 2013 | 5x114.3 | 66.1 | 40-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 INFINITI M
For your 2007 INFINITI M, the 5x114.3 bolt pattern is shared across 1992–2013 models, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 40-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and matching seat type (factory uses conical/60-degree seats). Avoid ball-seat or shank-style nuts. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, INFINITI M appears from 1992 to 2013 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.1mm ID to wheel bore) for aftermarket wheels to avoid vibration and center the wheel on the hub.
- ✅ Stick to offset 40-50mm; lower offset (e.g., 35mm) may rub fenders, higher (55mm) may contact suspension.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles, as wheels can settle and loosen.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 INFINITI M — Frequently Asked Questions
What is the bolt pattern for a 2007 INFINITI M?
The 2007 INFINITI M uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI M have the same bolt pattern as the 2007?
The INFINITI M uses the 5x114.3 pattern from 1992 through 2013. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 INFINITI M use?
The 2007 INFINITI M uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2007 INFINITI?
The 2007 M uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2007 INFINITI M?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2007 INFINITI M?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset