2011 INFINITI M Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 INFINITI M, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 M — Year-Specific Fitment Context
The 2011 INFINITI M is in year 20 of 22 using the 5x114.3 pattern (1992–2013). Wheels from any 1992–2013 INFINITI M are cross-compatible with the 2011 model.
INFINITI M Bolt Pattern by Year
The table below shows how the M's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 5x114.3 | 66.1 | 40-50 |
| 2004 | 5x114.3 | 66.1 | 40-50 |
| 2006 | 5x114.3 | 66.1 | 40-50 |
| 2007 | 5x114.3 | 66.1 | 40-50 |
| 2008 | 5x114.3 | 66.1 | 40-50 |
| 2009 | 5x114.3 | 66.1 | 40-50 |
| 2010 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2011 | 5x114.3 | 66.1 | 40-50 |
| 2012 | 5x114.3 | 66.1 | 40-50 |
| 2013 | 5x114.3 | 66.1 | 40-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 INFINITI M
For your 2011 INFINITI M, the 5x114.3 bolt pattern is shared with many models, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 40-50mm; deviating risks rubbing on suspension or fenders. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type (conical 60-degree for most aftermarket wheels; ball seat for OEM). Never mix seat types. Torque to manufacturer specs (typically 80-100 ft-lbs) and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, INFINITI M appears from 1992 to 2013 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, verify hub bore and install hub-centric rings if needed to avoid vibrations.
- ✅ Check brake caliper clearance when selecting wheels; some aftermarket designs may require spacers or different offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 INFINITI M — Frequently Asked Questions
What is the bolt pattern for a 2011 INFINITI M?
The 2011 INFINITI M uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI M have the same bolt pattern as the 2011?
The INFINITI M uses the 5x114.3 pattern from 1992 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use spacers on my 2011 INFINITI M?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Do 2011 INFINITI Ms use lug bolts or lug nuts?
The 2011 M requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another INFINITI fit my 2011 M?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What does 40-50mm offset mean for the 2011 M?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset