2014 INFINITI Q50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 INFINITI Q50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Q50 — Year-Specific Fitment Context
The 2014 model year marks the beginning of the INFINITI Q50's 5x114.3 bolt pattern era, which continued through 2024 (11 consecutive years). Wheels from any 2014–2024 INFINITI Q50 are cross-compatible with the 2014 model.
INFINITI Q50 Bolt Pattern by Year
The table below shows how the Q50's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 INFINITI Q50
The 2014 INFINITI Q50 uses a 5x114.3 bolt pattern with a 66.1mm center bore. When installing aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) or ball seat, depending on the wheel. Improper lug nut seating can lead to wheel loosening. Verify that aftermarket wheels have sufficient brake caliper clearance, especially for Sport models. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, INFINITI Q50 appears from 2014 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (66.1mm ID to aftermarket bore) to avoid vibrations and stress on wheel studs.
- ✅ Stick to offsets between 40-50mm for a flush fit; lower offsets may require fender rolling or camber adjustment.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles, and check periodically to prevent loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 INFINITI Q50 — Frequently Asked Questions
What is the bolt pattern for a 2014 INFINITI Q50?
The 2014 INFINITI Q50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 46mm.
What other years of INFINITI Q50 have the same bolt pattern as the 2014?
The INFINITI Q50 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2014 INFINITI Q50?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 66.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2014 INFINITI Q50?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2014 INFINITI Q50?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Do 2014 INFINITI Q50s use lug bolts or lug nuts?
The 2014 Q50 requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset