2025 INFINITI QX80 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 INFINITI QX80 is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 30-40, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 98 ft-lbs (133 Nm).

2025 INFINITI QX80 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Center Bore (Hub Bore) 78.1 mm
Offset Range (ET) 30-40
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 98 ft-lbs (133 Nm)
💡

Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 QX80 — Year-Specific Fitment Context

The 2025 INFINITI QX80 is in year 12 of 13 using the 6x139.7 pattern (2014–2026). Wheels from any 2014–2026 INFINITI QX80 are cross-compatible with the 2025 model.

INFINITI QX80 Bolt Pattern by Year

Looking for all generations? View the complete INFINITI QX80 (2014–2026) Bolt Pattern & Generation Guide →

The table below shows how the QX80's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2014 6x139.7 78.1 25
2015 6x139.7 78.1 25
2016 6x139.7 78.1 25
2017 6x139.7 78.1 25
2018 6x139.7 78.1 30
2019 6x139.7 78.1 30
2020 6x139.7 78.1 30
2021 6x139.7 78.1 30
2022 6x139.7 78.1 30
2024 6x139.7 78.1 30
▸ 2025 6x139.7 78.1 30-40
2026 6x139.7 78.1 30-40

2025 INFINITI QX80 Wheel Interchange & Donor Fitment Guide (6x139.7)

The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2025 INFINITI QX80, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:

DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2025 GMC Canyon 78.1 mm (Exact) 33 14x1.5 (Flat)
2023 GMC Canyon Crew Cab 78.1 mm (Exact) 30 14x1.5 (Cone)
2025 GMC HUMMER EV SUV 78.1 mm (Exact) 24-34 14x1.5 (Flat)
2003 GMC Safari Cargo 78.1 mm (Exact) 30 14x1.5 (Cone)
2003 GMC Safari Passenger 78.1 mm (Exact) 30 14x1.5 (Cone)
2025 GMC Savana 78.1 mm (Exact) 28-31 14x1.5 (Flat)

HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2023 Ford Ranger SuperCab 93.1 mm 93.1mm → 78.1mm 55
2024 Ford Ranger SuperCrew 93.1 mm 93.1mm → 78.1mm 55
2025 Isuzu NPR 110 mm 110mm → 78.1mm Not Applicable
2025 Isuzu NPR-HD 110 mm 110mm → 78.1mm Not Applicable
2007 Kia Sedona 92.2 mm 92.2mm → 78.1mm 46
2008 Lexus GX 106.1 mm 106.1mm → 78.1mm 25
Looking for all models? View the complete directory of vehicles with 6x139.7 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 INFINITI QX80 — Frequently Asked Questions

What is the bolt pattern for a 2025 INFINITI QX80?

The 2025 INFINITI QX80 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 30-40mm.

What other years of INFINITI QX80 have the same bolt pattern as the 2025?

The INFINITI QX80 uses the 6x139.7 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

What does 30-40mm offset mean for the 2025 QX80?

An offset of 30-40mm means the wheel's mounting surface is 30-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.

How tight should I torque the lug nuts on a 2025 INFINITI QX80?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I use spacers on my 2025 INFINITI QX80?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

What is the PCD for a 2025 INFINITI QX80?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 QX80, the PCD is 6x139.7.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

INFINITI QX80 By Year

2014 2015 2016 2017 2018 2019 2020 2021 2022 2024 2025 2026

Other INFINITI Models

EX FX G I J JX M Q Q40 Q50 Q60 Q70 QX QX30 QX50 QX55 QX60 QX70 QX80

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)