2020 INFINITI QX80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 INFINITI QX80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 QX80 — Year-Specific Fitment Context
The 2020 INFINITI QX80 is in year 7 of 11 using the 6x139.7 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX80 are cross-compatible with the 2020 model.
INFINITI QX80 Bolt Pattern by Year
The table below shows how the QX80's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 INFINITI QX80 has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, INFINITI QX80 appears from 2014 to 2024 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2020 INFINITI QX80 — Frequently Asked Questions
What is the bolt pattern for a 2020 INFINITI QX80?
The 2020 INFINITI QX80 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 30mm.
What other years of INFINITI QX80 have the same bolt pattern as the 2020?
The INFINITI QX80 uses the 6x139.7 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Why is matching the 78.1mm center bore important for the 2020 QX80?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2020 INFINITI QX80?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 30mm, and a center bore of at least 78.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 INFINITI?
The 2020 QX80 uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2020 INFINITI QX80?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 QX80, the PCD is 6x139.7.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
INFINITI QX80 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2024 (10 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 5.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 INFINITI QX80, please report it via our About page contact so we can verify and update this record.