2024 INFINITI QX80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 INFINITI QX80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 QX80 — Year-Specific Fitment Context
The 2024 model year is the final year of the INFINITI QX80's 6x139.7 bolt pattern run (since 2014). Wheels from any 2014–2024 INFINITI QX80 are cross-compatible with the 2024 model.
INFINITI QX80 Bolt Pattern by Year
The table below shows how the QX80's wheel specifications have changed over the years. The 2024 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 INFINITI QX80
For the 2024 INFINITI QX80, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels require hub-centric rings to avoid vibration and ensure proper load transfer. The factory offset is 30mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and matching seat type (conical or ball seat) to prevent loosening. Verify wheel load rating exceeds vehicle weight. This is the final year for this bolt pattern, so wheels from 2014–2024 QX80 models are direct fit.
Historical Fitment Data Reference
In our dataset, INFINITI QX80 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal lug nuts; they may not seat properly with the 12x1.25 threads.
- ✅ Check inner clearance for brake calipers when using lower offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 INFINITI QX80 — Frequently Asked Questions
What is the bolt pattern for a 2024 INFINITI QX80?
The 2024 INFINITI QX80 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 30mm.
What other years of INFINITI QX80 have the same bolt pattern as the 2024?
The INFINITI QX80 uses the 6x139.7 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 INFINITI?
The 2024 QX80 uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2024 INFINITI QX80?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 30mm, and a center bore of at least 78.1mm (using hub rings if larger).
Will wheels from another INFINITI fit my 2024 QX80?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
Can I use spacers on my 2024 INFINITI QX80?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset