2026 INFINITI QX80 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 INFINITI QX80 is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 30-40, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 98 ft-lbs (133 Nm).

2026 INFINITI QX80 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Center Bore (Hub Bore) 78.1 mm
Offset Range (ET) 30-40
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 98 ft-lbs (133 Nm)
💡

Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 QX80 — Year-Specific Fitment Context

The 2026 model year is the final year of the INFINITI QX80's 6x139.7 bolt pattern run (since 2014). Wheels from any 2014–2026 INFINITI QX80 are cross-compatible with the 2026 model.

INFINITI QX80 Bolt Pattern by Year

Looking for all generations? View the complete INFINITI QX80 (2014–2026) Bolt Pattern & Generation Guide →

The table below shows how the QX80's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2014 6x139.7 78.1 25
2015 6x139.7 78.1 25
2016 6x139.7 78.1 25
2017 6x139.7 78.1 25
2018 6x139.7 78.1 30
2019 6x139.7 78.1 30
2020 6x139.7 78.1 30
2021 6x139.7 78.1 30
2022 6x139.7 78.1 30
2024 6x139.7 78.1 30
2025 6x139.7 78.1 30-40
▸ 2026 6x139.7 78.1 30-40

2026 INFINITI QX80 Wheel Interchange & Donor Fitment Guide (6x139.7)

The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 INFINITI QX80, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:

DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Nissan Titan 78.1 mm (Exact) 25-35 14x1.5 (Flat)
2008 Nissan Titan Crew Cab 78.1 mm (Exact) 25 12x1.25 (Cone)
2025 Cadillac Escalade 78.1 mm (Exact) 24-31 14x1.5 (Flat)
2025 Cadillac Escalade ESV 78.1 mm (Exact) 24-31 14x1.5 (Flat)
2003 Chevrolet Astro Cargo 78.1 mm (Exact) 30 14x1.5 (Cone)
2003 Chevrolet Astro Passenger 78.1 mm (Exact) 30 14x1.5 (Cone)

HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Isuzu NPR-HD 110 mm 110mm → 78.1mm Not Applicable
2007 Kia Sedona 92.2 mm 92.2mm → 78.1mm 46
2008 Lexus GX 106.1 mm 106.1mm → 78.1mm 25
2022 Lexus LX 95.1 mm 95.1mm → 78.1mm 60
1997 MAZDA B-Series Cab Plus 93.1 mm 93.1mm → 78.1mm 25
1997 MAZDA B-Series Regular Cab 93.1 mm 93.1mm → 78.1mm 25
Looking for all models? View the complete directory of vehicles with 6x139.7 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 INFINITI QX80 — Frequently Asked Questions

What is the bolt pattern for a 2026 INFINITI QX80?

The 2026 INFINITI QX80 uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 30-40mm.

What other years of INFINITI QX80 have the same bolt pattern as the 2026?

The INFINITI QX80 uses the 6x139.7 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

What lug nut size does the 2026 INFINITI QX80 use?

The 2026 INFINITI QX80 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Do 2026 INFINITI QX80s use lug bolts or lug nuts?

The 2026 QX80 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What does 30-40mm offset mean for the 2026 QX80?

An offset of 30-40mm means the wheel's mounting surface is 30-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.

Can I use spacers on my 2026 INFINITI QX80?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

INFINITI QX80 By Year

2014 2015 2016 2017 2018 2019 2020 2021 2022 2024 2025 2026

Other INFINITI Models

EX FX G I J JX M Q Q40 Q50 Q60 Q70 QX QX30 QX50 QX55 QX60 QX70 QX80

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)