1996 Isuzu Hombre Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Isuzu Hombre Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1996 Hombre Regular Cab — Year-Specific Fitment Context
The 1996 model year marks the beginning of the Isuzu Hombre Regular Cab's 6x139.7 bolt pattern era, which continued through 2000 (5 consecutive years). Wheels from any 1996–2000 Isuzu Hombre Regular Cab are cross-compatible with the 1996 model.
Isuzu Hombre Regular Cab Bolt Pattern by Year
The table below shows how the Hombre Regular Cab's wheel specifications have changed over the years. The 1996 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1996 Isuzu Hombre Regular Cab
For your 1996 Isuzu Hombre Regular Cab, the 6x139.7 bolt pattern is shared with 1996–2000 models. The 100.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory 38mm offset maintains suspension geometry and tire clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or ball seat (factory). Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Isuzu Hombre Regular Cab appears from 1996 to 2000 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving, then periodically check.
- ✅ Aftermarket wheels with a center bore larger than 100.1mm require hub-centric rings; plastic rings are acceptable for street use.
- ✅ Avoid using lug nuts with a different seat angle (e.g., ball seat on conical wheels); always match the wheel's seat type.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Isuzu Hombre Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1996 Isuzu Hombre Regular Cab?
The 1996 Isuzu Hombre Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Hombre Regular Cab have the same bolt pattern as the 1996?
The Isuzu Hombre Regular Cab uses the 6x139.7 pattern from 1996 through 2000. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1996 Isuzu Hombre Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 38mm, and a center bore of at least 100.1mm (using hub rings if larger).
What lug nut size does the 1996 Isuzu Hombre Regular Cab use?
The 1996 Isuzu Hombre Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 1996 Isuzu Hombre Regular Cab?
The OEM offset for the 1996 Hombre Regular Cab is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Isuzu fit my 1996 Hombre Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset