2020 Jaguar E-PACE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Jaguar E-PACE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 14x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 48 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 E-PACE — Year-Specific Fitment Context
The 2020 Jaguar E-PACE is in year 3 of 7 using the 5x108 pattern (2018–2024). Wheels from any 2018–2024 Jaguar E-PACE are cross-compatible with the 2020 model.
Jaguar E-PACE Bolt Pattern by Year
The table below shows how the E-PACE's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2020 Jaguar E-PACE
For your 2020 Jaguar E-PACE, the correct bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 48mm; deviations beyond ±5mm may cause clearance issues with suspension or brakes. Always verify lug nut thread pitch (M14x1.50) and seat type—Jaguar uses a ball seat, not conical. Using incorrect lug nuts can lead to wheel loosening. Cross-compatible wheels from 2018–2024 E-PACE models fit, but confirm offset and bore.
Historical Fitment Data Reference
In our dataset, Jaguar E-PACE appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check brake caliper clearance when using wheels with offset lower than 43mm or wider than 8.5 inches.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Jaguar E-PACE — Frequently Asked Questions
What is the bolt pattern for a 2020 Jaguar E-PACE?
The 2020 Jaguar E-PACE uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 48mm.
What other years of Jaguar E-PACE have the same bolt pattern as the 2020?
The Jaguar E-PACE uses the 5x108 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Jaguar?
The 2020 E-PACE uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2020 Jaguar E-PACE?
The factory center bore (hub bore) for the 2020 Jaguar E-PACE is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2020 Jaguar E-PACE use?
The 2020 Jaguar E-PACE uses M 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2020 Jaguar E-PACE?
Refer to your owner's manual for exact specs, but always tighten the M 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset