2016 Kia Cadenza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Kia Cadenza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Cadenza — Year-Specific Fitment Context
The 2016 Kia Cadenza is in year 3 of 7 using the 5x114.3 pattern (2014–2020). Wheels from any 2014–2020 Kia Cadenza are cross-compatible with the 2016 model.
Kia Cadenza Bolt Pattern by Year
The table below shows how the Cadenza's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Kia Cadenza
The 2016 Kia Cadenza uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure the wheel is centered on the hub, preventing vibrations and load stress. The offset range is 35-50mm; deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Mismatched lug nuts can lead to wheel loosening. Verify lug nut engagement (at least 6-8 full turns) and torque to manufacturer specs.
Historical Fitment Data Reference
In our dataset, Kia Cadenza appears from 2014 to 2020 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific and requires rings for proper fitment.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as the Cadenza's front brakes are large and may contact spokes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Kia Cadenza — Frequently Asked Questions
What is the bolt pattern for a 2016 Kia Cadenza?
The 2016 Kia Cadenza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Cadenza have the same bolt pattern as the 2016?
The Kia Cadenza uses the 5x114.3 pattern from 2014 through 2020. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2016 Kia Cadenza?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 2016 Cadenza?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 35-50mm offset mean for the 2016 Cadenza?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
Can I use spacers on my 2016 Kia Cadenza?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset