2019 Kia Cadenza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Kia Cadenza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Cadenza — Year-Specific Fitment Context
The 2019 Kia Cadenza is in year 6 of 7 using the 5x114.3 pattern (2014–2020). Wheels from any 2014–2020 Kia Cadenza are cross-compatible with the 2019 model.
Kia Cadenza Bolt Pattern by Year
The table below shows how the Cadenza's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Kia Cadenza
The 2019 Kia Cadenza uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset range is 35-50mm; staying within this range maintains suspension geometry and avoids rubbing. Always use the correct 12x1.5 lug nuts with the appropriate seat type (cone or ball) to secure the wheel safely. Mismatched lug nuts can lead to loosening or wheel damage. Verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility before installation.
Historical Fitment Data Reference
In our dataset, Kia Cadenza appears from 2014 to 2020 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- ✅ Check that aftermarket wheels have sufficient clearance for the Cadenza's large brake calipers, especially with lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Kia Cadenza — Frequently Asked Questions
What is the bolt pattern for a 2019 Kia Cadenza?
The 2019 Kia Cadenza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Cadenza have the same bolt pattern as the 2019?
The Kia Cadenza uses the 5x114.3 pattern from 2014 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Kia Cadenza?
The factory center bore (hub bore) for the 2019 Kia Cadenza is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2019 Kia Cadenza?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Cadenza, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2019 Kia?
The 2019 Cadenza uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2019 Kia Cadenzas use lug bolts or lug nuts?
The 2019 Cadenza requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset