2019 Kia Niro Plug-in Hybrid Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Kia Niro Plug-in Hybrid, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 67.1 mm
Offset (ET) 35-50
Torque Specs 80 ft-lbs (108 Nm)

2019 Niro Plug-in Hybrid — Year-Specific Fitment Context

The 2019 Kia Niro Plug-in Hybrid is in year 2 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Kia Niro Plug-in Hybrid are cross-compatible with the 2019 model.

Kia Niro Plug-in Hybrid Bolt Pattern by Year

The table below shows how the Niro Plug-in Hybrid's wheel specifications have changed over the years. The 2019 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2018 5x114.3 67.1 45
▸ 2019 5x114.3 67.1 35-50
2020 5x114.3 67.1 35-50
2021 5x114.3 67.1 35-50
2022 5x114.3 67.1 35-50
2023 5x114.3 67.1 35-50
2024 5x114.3 67.1 35-50

Fitment Notes

The 2019 Kia Niro Plug-in Hybrid has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Kia Niro Plug-in Hybrid appears from 2018 to 2024 (7 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2019 Kia Niro Plug-in Hybrid — Frequently Asked Questions

What is the bolt pattern for a 2019 Kia Niro Plug-in Hybrid?

The 2019 Kia Niro Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.

What other years of Kia Niro Plug-in Hybrid have the same bolt pattern as the 2019?

The Kia Niro Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.

What lug nut size does the 2019 Kia Niro Plug-in Hybrid use?

The 2019 Kia Niro Plug-in Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the PCD for a 2019 Kia Niro Plug-in Hybrid?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Niro Plug-in Hybrid, the PCD is 5x114.3.

How tight should I torque the lug nuts on a 2019 Kia Niro Plug-in Hybrid?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Will wheels from another Kia fit my 2019 Niro Plug-in Hybrid?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Kia Niro Plug-in Hybrid is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2019 Kia Niro Plug-in Hybrid, please report it via our About page contact so we can verify and update this record.

Kia Niro Plug-in Hybrid By Year

2018 2019 2020 2021 2022 2023 2024

Other Kia Models

Amanti Borrego Cadenza Carnival EV6 EV9 Forte K900 Niro EV Optima Hybrid Rio Rondo Seltos Sorento Sorento Hybrid Soul Soul EV Sportage Stinger Telluride